M
HomeProductsFilter AccessoriesAccessories

Accessories

We offer a wide variety of filter accessories. We may not have what you need listed here, but rest assured knowing that when we offer filter recommendations, we are sure to include pieces you need for a successful installation. 

DriPak

P-Clips


P clips are made from .105 diameter, Galvanized Hard Drawn MB spring tempered wire and attached to an integral stainless steel bracket. Also available with Type 302 Stainless Steel wire.

DriPak

Pre Filter Clips


Standard pre filter clips are made from .020 thick x .500 wide – 1074 Spring Steel and plated with Zinc and Clear Dichromate.

DriPak

Differential Air Filter Plenum


 

Tri-Sorb 2 & 4

sales@joeflyco.com
210-508-7241

Tri-Sorb 2 & 4

Tri-Sorb 2 & 4 are thin-line filters that provide both molecular and particulate filtration. Their thin profile — just two and four-inch deep — allows easy use in current HVAC systems without the need for expensive modifications.

Product Specifications

molecuiar and particulate stages — saving time and money, and reducing the environmental impact.

High Density Polystyrene (HIPS)

Product Dimensions: 25″ x 25″ x 4 1/4″

Product Weight: 2lbs

8 high-energy, rare earth magnets ensure  secure mount

Tool-less installation

Tri-Sorb™ 50/50

sales@joeflyco.com
210-508-7241

Tri-Sorb™ 50/50

Molecular filtration is typically an after thought – for situations arise that were not planned for in the original HVAC system. This puts a premium on the ability to easily retrofit without expensive and messy construction projects.

Product Specifications

Tri-Sorb 50/50 allows for easy retrofit into current HVAC systems and is available in 1”, 2” and 4” depths with a wide variety of standard and special sizes to fit any application.

MERV 8A - medium efficiency

Extended surface

High dust holding capacity

Wire-supported mechanical media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

UL 900 Classified

Tri-Sorb Carbon

sales@joeflyco.com
210-508-7241

Tri-Sorb Carbon

Tri-Dim offers a full selection of molecular filtration bulk media to remove a broad spectrum of airborne molecular contaminants (AMC). The media types highlighted below are the more commonly requested, but specialty media is also available. 

Product Specifications

Upgrading to the Prime10 from a MERV 8 pleated air filter leads to a significant increase in filter efficiency, allowing fewer particles to pass through the filter’s media. Using our Prime10 pleated filters lessens build up on your HVAC’s coils, in turn saving you money and making your indoor space more energy efficient.

MERV 10

Available in 1″, 2″ and 4″

100% synthetic mechanical media

Heavy duty wire-supported construction

Moisture resistant beverage board frame

Made in the USA

Tri-Sorb M13

sales@joeflyco.com
210-508-7241

Tri-Sorb M13

The Prime11 is an extended surface, pleated air filter, created to provide high efficiency, high dust holding capacity and low pressure drop. The Prime11 is available in standard capacity as well as high capacity (Prime11HC). As an extended-surface air filter, the Prime11, performs at superior levels in comparison to standard pleated filters. The Prime11 is an economic choice for the efficiency and overall excellent performance it provides. The Prime11 has a MERV 11 rating per ASHRAE Test Standards 52.2. and is pending UL 900 Classification testing.

Product Specifications

The Prime11 was created to provide higher initial efficiencies and better overall performance than standard pleated filters, making it the perfect upgrade from our Prime8 filters as well as other standard MERV 8 pleated filters.

MERV 11 efficiency

Extended surface

High dust holding capacity

Less pressure drop

Wire-supported electrostatic media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

Carbon Pad & Die-Cut

sales@joeflyco.com
210-508-7241

Carbon Pad & Die-Cut

The Prime13 is a high efficiency pleated air filter, created to provide low initial resistance, high dust holding capacity and low pressure drop. As a high efficiency, extended-surface air filter, the Prime13 is a great solution for applications that need an upgrade from standard pleated MERV 8 and MERV 11 air filters. Trapping more than 98% of airborne particles, the Prime13 is ideal for commercial use. These air filters are designed to last longer than traditional MERV 13 offerings depending upon your indoor environment. The Prime13 has a MERV 13 rating per ASHRAE Test Standards 52.2 and is also UL 900 certified.

Product Specifications

The Prime13 has a durable, moisture-resistant, beverage board frame with wire-supported media. Secured in a heavy-duty two-piece die cut frame, the Prime13 has diagonal grid supports for added strength.

MERV 13 efficiency

Extended surface

High dust holding capacity

Wire-supported electrostatic media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

UL 900 certified

Tri-Sorb™ R

sales@joeflyco.com
210-508-7241

Tri-Sorb™ R

The Prime13 is a high efficiency pleated air filter, created to provide low initial resistance, high dust holding capacity and low pressure drop. As a high efficiency, extended-surface air filter, the Prime13 is a great solution for applications that need an upgrade from standard pleated MERV 8 and MERV 11 air filters. Trapping more than 98% of airborne particles, the Prime13 is ideal for commercial use. These air filters are designed to last longer than traditional MERV 13 offerings depending upon your indoor environment. The Prime13 has a MERV 13 rating per ASHRAE Test Standards 52.2 and is also UL 900 certified.

Product Specifications

The Prime13 has a durable, moisture-resistant, beverage board frame with wire-supported media. Secured in a heavy-duty two-piece die cut frame, the Prime13 has diagonal grid supports for added strength.

MERV 13 efficiency

Extended surface

High dust holding capacity

Wire-supported electrostatic media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

UL 900 certified

Tri-Sorb™ R M15

sales@joeflyco.com
210-508-7241

Tri-Sorb™ R M15

The Prime13 is a high efficiency pleated air filter, created to provide low initial resistance, high dust holding capacity and low pressure drop. As a high efficiency, extended-surface air filter, the Prime13 is a great solution for applications that need an upgrade from standard pleated MERV 8 and MERV 11 air filters. Trapping more than 98% of airborne particles, the Prime13 is ideal for commercial use. These air filters are designed to last longer than traditional MERV 13 offerings depending upon your indoor environment. The Prime13 has a MERV 13 rating per ASHRAE Test Standards 52.2 and is also UL 900 certified.

Product Specifications

The Prime13 has a durable, moisture-resistant, beverage board frame with wire-supported media. Secured in a heavy-duty two-piece die cut frame, the Prime13 has diagonal grid supports for added strength.

MERV 13 efficiency

Extended surface

High dust holding capacity

Wire-supported electrostatic media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

UL 900 certified

Tri-Sorb VH

The Prime13 is a high efficiency pleated air filter, created to provide low initial resistance, high dust holding capacity and low pressure drop. As a high efficiency, extended-surface air filter, the Prime13 is a great solution for applications that need an upgrade from standard pleated MERV 8 and MERV 11 air filters. Trapping more than 98% of airborne particles, the Prime13 is ideal for commercial use. These air filters are designed to last longer than traditional MERV 13 offerings depending upon your indoor environment. The Prime13 has a MERV 13 rating per ASHRAE Test Standards 52.2 and is also UL 900 certified.

Product Specifications

The Prime13 has a durable, moisture-resistant, beverage board frame with wire-supported media. Secured in a heavy-duty two-piece die cut frame, the Prime13 has diagonal grid supports for added strength.

MERV 13 efficiency

Extended surface

High dust holding capacity

Wire-supported electrostatic media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

UL 900 certified

Tri-Sorb V M15

sales@joeflyco.com
210-508-7241

Tri-Sorb V M15

The Prime13 is a high efficiency pleated air filter, created to provide low initial resistance, high dust holding capacity and low pressure drop. As a high efficiency, extended-surface air filter, the Prime13 is a great solution for applications that need an upgrade from standard pleated MERV 8 and MERV 11 air filters. Trapping more than 98% of airborne particles, the Prime13 is ideal for commercial use. These air filters are designed to last longer than traditional MERV 13 offerings depending upon your indoor environment. The Prime13 has a MERV 13 rating per ASHRAE Test Standards 52.2 and is also UL 900 certified.

Product Specifications

The Prime13 has a durable, moisture-resistant, beverage board frame with wire-supported media. Secured in a heavy-duty two-piece die cut frame, the Prime13 has diagonal grid supports for added strength.

MERV 13 efficiency

Extended surface

High dust holding capacity

Wire-supported electrostatic media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

UL 900 certified

Tri-Sorb™ XL Series

sales@joeflyco.com
210-508-7241

Tri-Sorb™ XL Series

The Prime13 is a high efficiency pleated air filter, created to provide low initial resistance, high dust holding capacity and low pressure drop. As a high efficiency, extended-surface air filter, the Prime13 is a great solution for applications that need an upgrade from standard pleated MERV 8 and MERV 11 air filters. Trapping more than 98% of airborne particles, the Prime13 is ideal for commercial use. These air filters are designed to last longer than traditional MERV 13 offerings depending upon your indoor environment. The Prime13 has a MERV 13 rating per ASHRAE Test Standards 52.2 and is also UL 900 certified.

Product Specifications

The Prime13 has a durable, moisture-resistant, beverage board frame with wire-supported media. Secured in a heavy-duty two-piece die cut frame, the Prime13 has diagonal grid supports for added strength.

MERV 13 efficiency

Extended surface

High dust holding capacity

Wire-supported electrostatic media

Moisture resistant beverage board frame

Available in 1″, 2″ & 4″

Max Operating Temp: 180°F

UL 900 certified