Belts

X3 Belts
• X3 belts bring in a new generation of wrapped V-Belt performance. They are specially designed to be low maintenance and are proven to be extra durable for belt life that will outlast the competition.
• X3 energy savings belts are ready to order in the following belt profiles: 3L, 4L, 5L, A, B, C, D, 3V, 5V, 8V, SPZ, SPA, SPB, SPC, AA, BB, CC, B-C-D banded, and 3V-5V-8V-SPB-SPC banded.

X5 Belts
• X5 belts are made with EPDM compound for improved belt life
• Temperature rating of -70°F to 260°F
• Product is all “one code” matching so there are never any matching issues


X3 Belt
X3 Belt
Our X3 belts are created to carry a high load capacity. Extensive durability testing, certified by a major USA University Department of Mechanical Engineering, shows
belt life that continues to out perform the competition. The X3 belts can carry a high capacity so that you can often use fewer belts on a drive resulting in space and cost savings, and reduction in axial and bearing loads.
Product Specifications
Durable belts designed to carry a high load capacity results in cost & space savings
X3 belts match to tighter tolerances than ARPM standards and ISO standards for confidence in running maximum loads
They are created to be low maintenance requiring no rechecks or re-tensioning
Meet all ARPM for heat & oil resistance, and are Static Conducting to ARPM, Mine Safety Standards and ISO 1813

X5 Belt
X5 Belt
X5 belts bring in a new generation of V-Belt performance. They are specially designed to use only 40% as much energy to bend around your machine’s pulleys, and are proven to outlast the competition. Saving energy and keeping your machines running at full capacity means you save time and money.
Product Specifications
X5 belts are made with EPDM compound for improved belt life
Product is all “one code” matching so there are never any matching issues
Works great with backside idlers at essentially no loss in belt life

Tri-Sorb Carbon
sales@joeflyco.com
210-508-7241
Tri-Sorb Carbon
Tri-Dim offers a full selection of molecular filtration bulk media to remove a broad spectrum of airborne molecular contaminants (AMC). The media types highlighted below are the more commonly requested, but specialty media is also available.
Product Specifications
Upgrading to the Prime10 from a MERV 8 pleated air filter leads to a significant increase in filter efficiency, allowing fewer particles to pass through the filter’s media. Using our Prime10 pleated filters lessens build up on your HVAC’s coils, in turn saving you money and making your indoor space more energy efficient.
MERV 10
Available in 1″, 2″ and 4″
100% synthetic mechanical media
Heavy duty wire-supported construction
Moisture resistant beverage board frame
Made in the USA

Tri-Sorb M13
sales@joeflyco.com
210-508-7241
Tri-Sorb M13
The Prime11 is an extended surface, pleated air filter, created to provide high efficiency, high dust holding capacity and low pressure drop. The Prime11 is available in standard capacity as well as high capacity (Prime11HC). As an extended-surface air filter, the Prime11, performs at superior levels in comparison to standard pleated filters. The Prime11 is an economic choice for the efficiency and overall excellent performance it provides. The Prime11 has a MERV 11 rating per ASHRAE Test Standards 52.2. and is pending UL 900 Classification testing.
Product Specifications
The Prime11 was created to provide higher initial efficiencies and better overall performance than standard pleated filters, making it the perfect upgrade from our Prime8 filters as well as other standard MERV 8 pleated filters.
MERV 11 efficiency
Extended surface
High dust holding capacity
Less pressure drop
Wire-supported electrostatic media
Moisture resistant beverage board frame
Available in 1″, 2″ & 4″
Max Operating Temp: 180°F

Carbon Pad & Die-Cut
sales@joeflyco.com
210-508-7241
Carbon Pad & Die-Cut
The Prime13 is a high efficiency pleated air filter, created to provide low initial resistance, high dust holding capacity and low pressure drop. As a high efficiency, extended-surface air filter, the Prime13 is a great solution for applications that need an upgrade from standard pleated MERV 8 and MERV 11 air filters. Trapping more than 98% of airborne particles, the Prime13 is ideal for commercial use. These air filters are designed to last longer than traditional MERV 13 offerings depending upon your indoor environment. The Prime13 has a MERV 13 rating per ASHRAE Test Standards 52.2 and is also UL 900 certified.
Product Specifications
The Prime13 has a durable, moisture-resistant, beverage board frame with wire-supported media. Secured in a heavy-duty two-piece die cut frame, the Prime13 has diagonal grid supports for added strength.